Publicité
Les langues disponibles
Les langues disponibles
The cutting attachment may cause an accident if it continues to turn after the engine has
stopped or after the engine switch has been released. When the unit has stopped, check
carefully that the cutting attachment has stopped turning before putting the unit down.
MAINTENANCE
Good maintenance is essential for safe, economical and trouble-free operation. It will also
help reduce air pollution.
The purpose of the maintenance and adjustment schedule is to keep the machine in the
best operating condition.
Turn off the engine before performing any maintenance. If the engine must be run, make
sure the area is well ventilated. The exhaust contains poisonous carbon monoxide gas.
Please always select recommended accessories. The accessories which have not
equivalent quality may damage the machine.
Please never use non approved components and remove the safety devices after or
during maintenance.
Maintenance
Clean the outside of the machine.
Make sure the throttle trigger lock and
the throttle function correctly from a
safety point of view.
Check that the engine switch works
correctly.
Check that the blades do not move when
the engine is idling or when the choke is
in the start throttle position.
Check that the blades are undamaged
and show no signs of cracking or other
damage. Replace the blades if
necessary.
Check that the blade guard is not
damaged or distorted. Replace the blade
GB
Daily
Weekly
maintenance
maintenance
X
X
X
X
X
X
26
Monthly
maintenance
Publicité
