Publicité
Les langues disponibles
Les langues disponibles
b) Keep the machine free of oil, dirt and other impurities.
c) Please always place the appliance on even and stable surfaces.
d) Never operate the appliance inside buildings or in an
environment without proper ventilation. Pay attention to air flow
and temperature.
e) Do not operate or store the appliance in wet or humid
surroundings.
f) Ensure the sound absorber and air filter work properly. These
parts serve as flame protection in case of misfire.
g) To avoid possible burn injuries, do not touch the exhaust system
or other parts that become hot during operation. Pay attention
to the warnings on the machine.
h) The engine must not be operated with excessive rotary speed.
The operation of the engine with excessive rotary speed raises
the risk of injury. Parts which affect the rotary speed must not be
altered or replaced.
i) Regularly check for leakage or traces of abrasion in the fuel
system, such as porous pipes, loose or missing clamps and
damage to the tank or tank cap. Before use all defects must be
repaired.
j) Work only in daylight or in good artificial light.
k) Never pick up or carry a machine while the engine is running
l) Stop the engine:
- whenever you leave the machine
- before refueling
m) Before checking or adjusting the machine, the ignition plug and
the ignition wire respectively must be removed to prevent
accidental starting.
n) Do not use of the machine when the operator is tired, ill or under
the influence of alcohol or the drugs.
o) Comply with local regulations to use the brush cutter.
GB
7
Publicité
