Publicité
Les langues disponibles
Les langues disponibles
GB
WARNING!
Never use non-recommended cutting attachments and appropriate guards and their
location. The non approved cutting attachments may cause serous injure during working.
OPERATION
Before use
Please always read the instruction manual carefully and check the machine before
operating.
WARNING!
The brush cutter is fitted with a two-stroke engine, so no need fill oil separately. Fill
the oil mixed with fuel, please consult below section .
Check the cutting attachment, never use blades that are dull, cracked or damaged.
Make sure the handle and safety features are in good working order. Never use a
machine that lacks a part or has been modified outside its specifications.
The enclosures must be correctly fitted and undamaged before you start the machine.
WARNING!
Please always use quality gloves, foot, ear and eye protector. They should be with CE
mark and tested according to PPE (Person Protective Equipment) directive.
The poor equipments may reduce the protection and result in personal injury during
working.
Engine fuel
WARNING!
The brush cutter is fitted with a two-stroke engine; use fuel mixed with oil only.
Only fuel the machine in well-lit areas. Avoid fuel spillage. Never refuel the machine
during operation. Let the engine cool down for about two minutes before refueling.
Refueling must not be carried out near naked flames, control lamps or spark producing
electrical equipment such as electric tools, welders or sanders.
1. Make sure the machine is turned off, by turn the engine switch to the "off" position.
2. Check the fuel by a visual check , remove the fuel cap and reviewing the fuel level.
3. Fill unleaded fuel mixed with oil from an approved fuel container into the fuel tank,
18
Publicité
