Bestgreen BCI43U Traduction Des Instructions D'origine page 83

GB
.
Fig.4.2
Attention: When using the 2T Blade, the additional guard must be fitted.
Release blade (Fig.5)
Use screw driver to hold flange and release nut, the blade can be took off.
Fig.5-1 Fig.5-2
WARNING!
Please make sure the cutting head has been assembled correctly before use!
Nylon head
Release the nut(Fig.6)
Line up the two holes of flange and shield, use one screw driver to hold the flange as
below and turn the socket wrench clockwise, the nut will be released.
Fig.6
16