Publicité
Les langues disponibles
Les langues disponibles
PLAYING A SOURCE
1. Set the master VOLUME control to minimum.
Front panel
VOLUME
2. Turn the power on.
Front panel
POWER
3. Select an input source.
The selected source is shown by the display panel and the
monitor screen. For the source that inputs two or more types of
signals to this unit, its current input mode is also shown.
Front panel
INPUT SELECTOR
LD
TV/DBS
TAPE 1
VCR 1
TUNER
VCR 2
CD
VCR 3/DVD
PHONO
VIDEO AUX
I NPUT
AUTO : PCM
GENERAL OPERATION
Remote control
POWER
or
Remote control
CD
or
CD
* To change the input mode, press the INPUT MODE switch on
the front panel or the input selector key for the currently
selected source on the remote control unit. (See page 46 for
details on switching the input mode.)
Front panel
INPUT MODE
* To select a tape deck connected to this unit's TAPE 2 jacks,
press the TAPE 2 MONITOR switch. (Otherwise, turn this switch
off.)
Front panel
4. Play the source.
5. Increase the setting of the master VOLUME control to your
listening level.
Front panel
VOLUME
Adjust the BASS, TREBLE, BALANCE controls, etc., or select a
desired sound field program. (See page 49.)
NOTE: If a different audio source is selected with the input selector
keys on the remote control unit while enjoying a video source, the
sound from the newly selected audio source is heard, but the picture
from the video source can still be seen.
Remote control
CD
or
TAPE 2
MONITOR
Remote control
or
MASTER
VOLUME
45
Publicité
