FLAVIA Creation 200 Manuel D'utilisation page 10

P R E P A R I N G A B E V E R A G E / D R I N K
BREWING CAPPUCCINO / LATTE DRINKS
Cappuccino drinks are made using two packs, firstly a Cappuccino/Latte Swirl followed by the
coffee of your choice.
Follow Steps 1-5 above.
At Step 2 the 'CAPUPUCCINO/LATTE' category should be selected.
At Step 4 a 'CAPUPUCCINO/LATTE SWIRL' filterpack should be inserted
Step 6
At the end of the Cappucino/Latte Swirl pack (Pack 1 of 2), the 'INSERT/REMOVE PACK' indicator
will flash. This is a prompt for you to remove the empty first pack and insert the second filter
pack., which should be a FLAVIA coffee filterpack.
Lift the handle, remove the first empty Cappucino/Latte Swirl pack and insert the coffee
filterpack. Close the handle firmly. The Brewer will now start to brew the coffee pack for your
beverage.
It is important that the packs are placed in the correct order. Please see the packs for further
information.
Step 7
Lift the handle and remove the filterpack for disposal.
Note
All seven lights will briefly flash on the Brewer to indicate when your beverage is ready, after
which the drink selection lights will be lit.
LARGE/TRAVEL MUG FACILITY
To vend your drink into a large mug or travel mug, remove the drip tray, place your mug and follow the
normal drink making steps.
HOT WATER FACILITY
Your Brewer can also vend hot water if required,
With no filterpack In place. press and hold the 'HOT WATER' button. Hot water will begin to flow whilst
the button Is pressed. Release the button to stop the water flow. The hot water dispense will
automatically stop after a maximum vend volume has been reached If the button Is not released.
8