Cutting Attachment - Husqvarna 220iL Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Use a protective helmet where there is a risk of
falling objects.
Long term exposure to noise can result in damaged
hearing. In general, battery powered products are
relatively quiet but damage can result from a
combination of noise level and long usage.
recommends that operators use hearing protectors
when using products for a longer coherent time of a
day. Continual and regular users should have their
hearing checked regularly.
WARNING: Hearing protectors limit the
ability to hear sounds and warning
signals.
Use approved eye protection. If you use a visor, you
must also use approved protective goggles.
Approved protective goggles must comply with the
ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
8
Use sturdy non-slip boots.
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
Keep first aid equipment close at hand.

Cutting attachment

WARNING: Remove the battery and make
sure the cutting attachment stops completely
before you work on any part of the cutting
attachment.
WARNING: Only use the cutting attachment
with the guards we recommend, see
Accessories on page 20 .
Trimmer head
Always use the correct trimmer head, cutting
attachments and always use the recommended
trimmer line. Refer to
the assembly in the end of the Manual.
Make sure that the cutter on the trimmer guard is not
damaged.
Make sure that the trimmer line is wound tightly and
equally around the drum to prevent unusual
vibrations from the product. Different cord lengths
can result in vibrations that are not necessary. Tap
the trimmer head to get correct length on the cord.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried out
to ensure that it operates correctly. See instructions
Accessories on page 20 and
1511 - 003 - 06.11.2020

Publicité

Table des Matières
loading

Table des Matières