Husqvarna 220iL Manuel D'utilisation page 9

Product overview on page 2 to find
under the heading
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work on
the machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the keypad
• Push and hold the power button (A).
B
a) The product is on when the LED (B) is on.
b) The product is off when the LED (B) is off.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental start.
When you push the power trigger lockout (A) forward, it
releases the power trigger (B). When you release the
1511 - 003 - 06.11.2020
A
handle, the power trigger and the power trigger lockout
move back to their initial positions.
A
1. Make sure that the power trigger is locked when the
power trigger lockout is in its initial position.
2. Push the power trigger lockout (A) forward. Make
sure that it moves back to its initial position when
you release it.
B
A
9