T-Fal Filtra One FF162850 Guide De L'utilisateur page 11

Problems and solutions
Problems and possible causes
The appliance is not plugged in.
The oil/fat has deteriorated.
The oil/fat is unsuitable.
The lid is not closed properly.
Food is wet or contains too much water
(frozen food).
Different types of oil have been mixed.
Vision through the viewing window is not clear.
The Max. marker for filling the bowl has
been exceeded.
The Max. marker for filling the bowl has
been exceeded.
The frying basket has been overfilled
with food.
Food is wet or contains too much water
(i.e. frozen food).
Wrong oil or different types of oil/fat
have been mixed.
Unsuitable oil/fat has been used.
The deep fryer does not work.
Unpleasant odors.
Steam escapes from around the lid.
The frying oil overflows.
Solutions
Plug in the appliance.
Replace the frying oil/fat (after 12 uses
max.), or more frequently depending on
the type of oil/fat used.
Use a good quality blended vegetable
oil/fat. (see p.8).
Check that the lid is properly locked
closed.
Remove any ice and dry the food
thoroughly. Lower the basket slowly (see
p.9).
Empty and clean the bowl. Refill the bowl
with one type of oil.
Check the level (Max.) and remove the
excess of oil after the fryer is cool.
Check the level (Max.) and remove the
excess of oil after the fryer is cool.
Check that the basket is not too full.
Remove any ice and dry the food
thoroughly before frying.
Empty and clean the bowl. Refill the bowl
with one type of oil/fat.
Use a good quality blended vegetable
oil/fat (see p. 8).
EN
13