INSTALLATION
When installing the hood in recycling version it has to be taken into consideration that space re-
maining between the hood and the upper limit (ceiling or self) is at least 3"15/16.
On the wall, draw:
• a Vertical line up to the ceiling or upper limit, at the center of the area in which the hood is
to be fitted;
• a Horizontal line at a minimum of 41" 5/16 above the Cooker Top; .
• As indicated, mark a reference point at 3" 15/16 to the right of the vertical reference line.
• Repeat this operation on the other side, checking that the two marks are level.
• As indicated, mark a reference point at 15" 3/8 above the horizontal reference line, and at
3" 15/16 to the right of the vertical reference line.
• Repeat this operation on the other side, checking that the two marks are level.
• Drill at the points marked, using a 3/8" drill bit.
• Insert the plugs 11 into the holes.
EN
Wall drilling and bracket fixing
3"15/16 3"15/16
11
12a
3"15/16 3"15/16
6"11/16
8 8