Franke FTU 3807 W Instructions D'installation page 14

Masquer les pouces Voir aussi pour FTU 3807 W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Metal grease filters
Filters can be washed in the dishwasher. They need to be
washed when FF-sign appears on the display or in any
case every 2 months, or even more frequently in case of
particularly intensive use of the hood.
Alarm reset
• Switch off the hood and the lights. If the 24h-function
has been activated this has to be deactivated.
• Press the E-key till the display is unlit.
Cleaning the filters
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards the
back side of the hood unit and simultaneously pulling
downwards.
• Any kind of bending of the filters must be avoided when
washing them. Before fitting them again into the hood
make sure that they are completely dry. (The color of
the filter surface may change throughout the time but
this has no influence on the filter efficiency).
• When fitting the filters into the hood pay attention that
they are mounted in correct position the handle facing
outwards.
• Close the comfort panel.
EN
1
14
4

Publicité

Chapitres

Table des Matières
loading

Table des Matières