Omron VARISPEED V7 CIMR-V7TZ 05 Serie Guide De Démarrage Rapide page 48

Les langues disponibles

Example of Parameter Settings

Key sequence

Indicator

In approx. 1s

Note 1: To cancel the set value, press the Mode Key instead. The parameter will be displayed.

Note 2: There are parameters that cannot be changed while the Inverter is in operation. Refer to the

list of parameters. When attempting to change such parameters, the data display will not change by

pressing the Increment or Decrement Key.

Cancels

set data

In approximately 1s

Display example

Explanation

Power ON

Press the Mode Key repeatedly until the PRGM

indicator is lit.

Use the Increment or Decrement Key to set the

parameter number.

Press the Enter Key.

The data of the selected parameter number will

displayed.

Use the Increment or Decrement Key to set the data.

At that time the display will flash.

Press the Enter Key so that the set value will be

entered and the data display will be lit. (see note 1)

The parameter number will be displayed.

EN-19