Forest-Master Shown FM10TW Mode D'emploi page 29

4. Attach the rear wheels you have removed from
the splitter, to the rear axle bar(3). To secure the
wheels, you can either reuse the circlips or use
the additional split pins supplied.
Refit the hubcaps, these just push on.
FM5, FM8 & FM10 (Versions D, T & TW)
3. Remove the 4 bolts and nuts holding the front
leg to the body and remove the front foot assembly
from the log splitter. Keep the nuts and bolts as
they will be used to attach the stand front leg.
Keep the front leg in case at any time you wish to
remove the splitter from the stand and use it at
ground level.
Reuse circlips or use split
pins to attach
29