Gong FEELX Guide De L'utilisateur page 34

RESET THE CHICKEN LOOP
To reset your quick release, grab your chicken loop
with one hand on the depower line just above the
swivel. Be careful NOT TO LEAN ON THE RED
RING. Then with the second hand, replace the loop
in the quick release socket and press firmly until it
snaps back into place automatically. To facilitate
handling, carefully respect the position of the diagram
: chicken loop upwards.
USING THE QUICK RELEASE OF THE KITE LEASH
TRIGGER THE LEASH RELEASE SYSTEM.
If, even after activating the chicken loop safety system and releasing the bar, you are still in danger, the last
preventive action is to release the kite leash connected to your harness.
To completely release your kite, push the red ring of the leash quick release.
You are now completely separated from the kite and its lines.
Be aware that your equipment will move downwind and can still pose a danger to people in its path.
RESET THE LEASH QUICK RELEASE.
��
- Hold the end, pulling the ring of the quick release with one hand to expose the metal attachment.
��
- Pass the loop of the connection loop through the metal attachment and fold the attachment into the axis
of the leash.
��
- Release the red ring.
EN
- 34