Publicité
Les langues disponibles
Les langues disponibles
Problem and alarm code
The appliance trips the cir‐
cuit-beaker.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
The washing and drying results are not satisfactory
Problem
Poor washing results.
Poor drying results.
There are whitish streaks or
bluish layers on glasses and
dishes.
There are stains and dry water
drops on glasses and dishes.
Possible cause and solution
•
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the appliances
in use.
•
Internal electrical fault of the appliance. Contact an Au‐
thorised Service Centre.
Possible cause and solution
•
Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
•
Use more intensive washing programme.
•
Activate the
a selected programme.
•
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
•
Tableware was left for too long inside the closed appli‐
ance. Activate AirDry to set the automatic opening of the
door and to improve the drying performance.
•
There is no rinse aid or the dosage of rinse aid is not
sufficient. Fill the rinse aid dispenser or set the level of
rinse aid to a higher level.
•
The quality of the rinse aid can be the cause.
•
We recommend to use rinse aid always, even in combi‐
nation with multi-tablets.
•
Plastic items may need to be towel dried.
•
The programme does not have the drying phase. Refer
to "Programmes overview".
•
The released quantity of rinse aid is too high. Adjust the
rinse aid level to a lower level.
•
The quantity of detergent is too high.
•
The released quantity of rinse aid is not sufficient. Adjust
the rinse aid level to a higher level.
•
The quality of the rinse aid can be the cause.
WARNING! We do not
recommend using the
appliance until the problem has
been completely fixed. Unplug
the appliance and do not plug it
in again until you are certain
that it operates correctly.
option to improve the washing results of
51
Publicité
