Publicité
Les langues disponibles
Les langues disponibles
Janome 9002D Instruction Manual
5
4 5
7
6 7
8 9
1
www.toews.com
38
4
6
9
8
2
4. Insert the thread between tension discs from the
right. Then pull both sides of thread.
5. Pass the thread through upper looper thread
guide (1)
4
Upper looper thread tension dial
5
Upper looper thread guide (1)
6. Pass the thread through upper looper thread
guide (2).
7. Pass the thread through the looper thread
take-up lever (upper).
6
Upper looper thread guide (2)
7
Looper thread take-up lever (upper)
8. Pass the thread through upper looper thread
guide (3).
9. Holding the end of the thread with a pair of
tweezers, pass it through the hole on the upper
looper. Pull 10 cm (4˝) or more of thread through
the hole.
8
Upper looper thread guide (3)
9
Upper looper
NOTE:
* When you thread the upper looper only, to avoid
tangled threads pull out both threads over the needle
plate and under the presser foot.
Turn the handwheel toward you until the upper looper
comes to the middle point of its travel, and unhook the
thread of the lower looper from the upper looper.
Thread the upper looper.
1
Lower looper thread
2
Upper looper
Janome Serger
9002D Owners Manual/ User Guide
Publicité
