Janome 9002D Livret D'instructions page 16

Janome 9002D Instruction Manual
2
1 2
1
1
2
www.toews.com
14
The Position of Thread Guide Bar
1
1. Pull the thread guide bar up as far as it will go.
2. Turn the thread guide bar so that the thread
3
4
* Make sure to lock the thread guide of guide pole in the
Attaching the Spool Holder Cap and Net
3
1. When you use a small thread spool, pull out the
4
2
2. If the thread slips down from the spool
* The spool holder cap and net are optional
2
1
guides are right above the spool pins.
1
Thread guide bar
2
Thread guide
3
Stoppers
4
Spool pin
correct position with the two stoppers.
spool holder from the spool pin. Then place the
spool with its slit side up, and put the spool
holder cap on top of it.
1
Spool holder
2
Spool pin
3
Spool holder cap
4
Slit
during threading and/or sewing, put a net on the
spool as illustrated to prevent jamming.
accessories.
1
Net
2
Spool pin
Janome Serger
9002D Owners Manual/ User Guide