switel TC42 Mode D'emploi page 46

PABX / Supplementary Services
6 PABX / Supplementary Services
R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Please refer to the manual provided with your private branch exchange.
The sales outlet where you purchased the exchange can provide
information as to whether the telephone will work properly with the
exchange.
Dialling pause
When using private branch exchanges, it is necessary to dial an access
code to obtain the dialling tone for an outside line. When using some older
private branch exchanges, it takes a little time before the dialling tone
becomes audible. In the case of such private branch exchanges, a dialling
pause can be inserted after the number for an outside line in order to
continue dialling directly without having to wait for the dialling tone.
£
After dialling the number for the outside line, the telephone waits approx. 3
seconds before dialling the actual phone number.
R−button and supplementary services
Your telephone supports supplementary services provided by your
telephone network provider, such as brokering, call waiting and
conference facilities. These supplementary services can be used by
implementing the
R button. Contact your telephone network provider with regard to
enabling supplementary services.
Setting the Flash time
Set the required Flash time using the sliding switch located on the
underside of the telephone. You can select between 100 ms and 300 ms.
46
All manuals and user guides at all-guides.com
15
Insert a dialling pause