GYS PROTIG 231L DC PFC Mode D'emploi page 26

User manual
RESETTING THE WELDING STATION
It is possible to restore the factory settings of the welding machine. This advanced setting is accessed by pressing the «A or V display switch
button for more than 3 seconds. Then select «InI» by operating the main incremental encoder and press the AV button again to confirm this choice.
The station then displays «3», «2», «1», «rSt» and then resets the unit.
FUNCTION, MENU AND PICTOGRAM DESCRIPTIONS
FUNCTION
HF ignition
Lift ignition
Pre-gas
Up slope current
Welding current
Cold current/Background
current)
PULSE frequency
Down slope current.
Post-gas
HotStart
ArcForce
TIG PULSE
TIG SPOT
TIG SPOT PULSE
MMA PULSE
2T
26
Translation of the original
instructions
TIG
PICTOGRAM MMA Comments
DC
&
TIG process with HF ignition
TIG process with LIFT ignition
Time to purge the torch and to protect the area with gas before ignition
Up slope current
Second welding current
Second welding current or «cold» current in standard 4TLOG or in PULSE
mode
PULSATION frequency of the PULSE mode (Hz)
Down slope current to minimum current, I Stop (S) to prevent weld defects
and craters.
Duration for which gas is released after the arc has stopped. It protects the
weld pool and the electrode against oxidization when the metal is cooling (S).
Adjustable overcurrent at the beginning of the welding (%)
Overcurrent delivered to avoid sticking when the electrode enters the welding
pool
Pulse mode
Spot Mode
Pulse spot Mode
MMA process in PULSE mode
2 time torch mode
PROTIG 231L DC PFC
»