Publicité
Les langues disponibles
Les langues disponibles
All switches in maintained-action mode must be positioned so that the moving gates leaves, the transit
areas and vehicle thru-ways are completely visible, and yet the switches must be also away from any
moving parts. • Unless the action is key operated, the control devices must be fitted at, at least, 1.5 m
from the ground and unreachable by any unauthorized persons. • To pass the collision force test use a
suitable sensitive safety-edge. Install it properly and adjust as needed. • Before handing over to users,
check that the system is compliant with the 2006/42/CE uniformed Machinery Directive. Make sure
the settings on the operator are all suitable and that any safety and protection devices, and also the
manual release, work properly. • Affix a permanent tag, that describes how to use the manual release
mechanism, close to the mechanism. • Make sure to hand over to the end user, all operating manuals
for the products that make up the final machinery.
- The next figure shows the main hazard points for people -
Danger of high voltage;
Danger of crushing;
Danger of foot crushing;
Danger of hand entrapment;
Do not transit through during maneuvering.
Publicité
