Operation; Flowmeter Operation Via Push Button And Display - INTEGRA Metering AMFLO SONIC UFA-280 Instructions De Montage Et Mode D'emploi

Operation

Flowmeter operation via push button and display

The transmitter control panel is designed with a single push button and a 8-digit display for optimal dialog – see Fig 1.
After fitting new batteries, reset internal power calculation counter to correctly indicate power capacity.
Abb. 1
When new batteries are installed, the flowmeter start-up routine begins. First, display shows active software version. After ten seconds the
message „reset.bat" will appear. Press push button within six seconds to reset internal power calculation counter. The message „accept"
will appear. When push button is pressed again within six seconds, internal battery counter will be reset, and battery indicator will show
„full" – see Fig. 12.
Abb. 2
Push button
Activate push button to toggle to next index and related information – see Fig. 3.
Status
Information
Index & menu
30
No reset
Reset of battery operating time
Battery status
Alarm
Index
8-digit display
Infra-red communication port
Single push button
AMFLO SONIC UFA-280
®