Operation - INTEGRA Metering AMFLO SONIC Smart Instructions De Montage Et Mode D'emploi

4

Operation

NOTICE
For proper function the device has to be properly connected to a power supply
and the measuring pipe must be filled completely.
4.1 Display
The displayed LEDs are used for flow identification.
NOTE
At the top of the electronic unit two LEDs for operation and/or error signalisation
are located, which have the following three options:
- Green LED is blinking or lighted: flow indication analogue to output
pulse
- Red LED is blinking or lighted: negative flow or against flow direction (ar-
row direction on housing)
- White and red LEDs are blinking or lighted simultaneously: flow above
specification
- Red LED is lighting: an general error occur
4.2 Operation
NOTICE
When used in custody transfer the country-specific regulations have to be con-
sidered!
NOTICE
Commissioning must only be performed by qualified personnel!
28