Publicité
4-1. Important Information Regarding CE Products (Sold Within The EU)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
4-2. Specifications
Model
Volts
RAD−100
115 VDC
4-3. Description
OM-238 428 Page 12
SECTION 4 − INSTALLATION
Horsepower
1/5 HP
Motor Speed
Ratio
2500 RPM
120 : 1
1
Rated
Rated Torque
Output
Speed
290 in. lb
21 RPM
1
Motor
This unit is a heavy-duty motor de-
signed for automated strip clad ap-
plications.
The various strip head manufac-
turers have made their own adapt-
ers for their respective heads.
This unit is offered as a motor
only. Contact strip head manufac-
turers for mounting instructions.
Ref. 805 215-A
Publicité
