Publicité
Les langues disponibles
Les langues disponibles
96
Installation
IInstallation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
1. After removing all the packaging, carefully lay
machine on it's back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining hose from the hose holders on the rear of the
appliance.
3.
With a suitable spanner unscrew and remove the
central rear bolt A.
Downloaded from www.vandenborre.be
HEC0008
HEC0001
HEC00022
A
Publicité
