Publicité
Les langues disponibles
Les langues disponibles
90
Something not working
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that the y y e e l l l l o o w w Start/Pause pilot light flashes, one of
the following alarm codes appears on the display and at the same some acoustic signals
sound every 20 seconds to indicate that the machine is not working:
•
E10
: problem with the water supply
•
E20
:
problem with the water draining
•
E40
:
door open.
EF0
•
:
Anti-flooding system has activated
Once the problem has been eliminated, press the S S t t a a r r t t / / P P a a u u s s e e button to restart the
programme. If after all checks, the problem persists, contact your local Service Centre.
Problem
The washing machine does not
start:
The door has not been closed.
• Close firmly the door.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the
Start/Pause button has not been depressed.
• Please turn the selector dial and press the
The delay start has been selected.
• If the laundry are to be washed immediately, cancel
Downloaded from www.vandenborre.be
Possible cause/Solution
Start/Pause button again.
the delay start.
E40
Publicité
