72
use
You can modify or cancel the delay time at any moment, before you press the
Start/Pause button.
If you wish to add laundry in the machine during the delay time, press
Start/Pause button to put the machine in pause. Then wait for some minutes, until
the «Door»
closed the door, press the Start/Pause button again.
The washing programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours by means of this button.
Selecting the delayed start:
Select the programme and the required options;
●
Select the delay start;
●
Depress «Start/Pause» button: the machine starts its hourly countdown. The
●
programme will start after the selected delay has expired.
Cancelling the delayed start:
set the washing machine to PAUSE by pressing the Start/Pause button;
●
press the Delay Start button until the symbol
●
press the Start/Pause button again to start the programme.
●
The Delay Start option can not be selected with Drain programme
Programme progress display
The programme progress display shows the
washing phases of the selected programme.
During the washing, a black line flashes under
the washing phase symbole of the running
programme. At the end of each washing phase , the line under the corresponding
symbol becomes fixed.
If the symbol
that too much detergent has been used.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
Start/Pause button.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O/Off and then to the new programme position. The
washing water in the tub will be not emptied out. Start the new programme by
depressing the Start/Pause button again.
symbol stops flashing before opening the door. After you have
«Overdosage» lights up at the end of the programme, it indicates
Downloaded from www.vandenborre.be
0'
is displayed;
.