Publicité
Les langues disponibles
Les langues disponibles
End of the programme
When the programme has finished a flashing
0
zero (
is displayed, the «Door»
disappears and the door can be opened.
Select the «Start/Pause»
To start the selected programme, press the
Start/Pause button; the corresponding red pilot light stops flashing.
The «Door»
started operating and the door is locked.
The «Door»
can be opened:
the «Door»
●
cannot be opened. The appliance is
performing a washing programme.
the «Door»
●
be opened. The washing programme is finished.
To interrupt a programme which is running, depress the Start/Pause button: the
corresponding red pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the
Start/Pause button again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the integrated yellow pilot light of the
Start/Pause button flashes for 3 times, the message Err is displayed for about 2
seconds.
Select the Delay Start
Before you start the programme, if you wish to delay the start, press the Delay
Start button repeatedly, to select the desired delay.
The corresponding symbol will appear on the display
The selected delay time value (up to 20 hours)
will appear on the display for about 3
seconds, then the duration of the programme
will appear again.
You must select this option after you have set
the programme and before you press the
Start/Pause button.
symbol appears on the display to indicate that the appliance has
symbol indicates if the door
symbol is on: the door
symbol is off: the door can
Downloaded from www.vandenborre.be
- symbol
use
71
Publicité
