Use; Select Operating Mode; Switching On And Off; Adjusting The Rotational Speed - Parkside PBH 800 A1 Mode D'emploi

Use

Select operating mode

Function selector:
♦ Press and hold the release button
function selector switch
selector switch so that the required symbol
engages at the arrow mark:
Function
Drilling/screwing
Hammer drilling
Chiselling
Chisel position adjust-
ment
Adjusting chisel position:
You can rotate the tool to the required position for
chiselling using this function.
♦ Turn the function selector switch
♦ Turn the tool in the tool holder
position.
♦ Turn the function selector switch
for the chiselling function.
PBH 800 A1
on the
. Turn the function
Symbol
to position .
to the required
to position
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch
Switching the device off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch
again.

Adjusting the rotational speed

The ON/OFF switch
control. Pressing the ON/OFF switch
yields a low speed. Increasing pressure increases
the speed.

Changing the direction of rotation

♦ Change the direction of rotation by pressing
the rotation direction switch
or right.
.
.
. Lock it in the
and release it
has a variable speed
lightly
towards the left
GB │ IE │
17■