Wamsler SETO Mode D'emploi page 29

Masquer les pouces

page de 60

/ 60
Signets

Les langues disponibles

All information provided by the exhaust gas values are based on the EN 13240 under stationary labor-

atory conditions. We reserve the right to make changes which relate to technical advances and / or to

an improvement in quality. We accept no liability for printing errors and changes which occur after

printing.

4. Disposal of the device after wear

In the case of disposal of the furnace, a well thought-out construction with screw and plug

connections enables simple dismantling and good separation of the individual materials.

After dismantling the heating door and fire grate, the internal parts of the combustion

chamber are easily accessible and can either be removed without tools or easily un-

screwed. Other add-on parts can also be completely dismantled with the help of a screw-

driver, water pump pliers and open-ended wrench set.

You can find an overview of the components of the stove here:

Material

Steel, cast iron,

magnets

Stainless steel

Ceramic, natural

stone

Glass Ceramic

Chamotte

(in contact with fire)

Vermiculite

(in contact with fire)

Glass fiber sealing

strips

Haus – und Küchentechnik GmbH

Adalperostraße 86

D – 85737 Ismaning

Telefon +49 (0)89 32084-0

Telefax +49 (0)89 32084-294

www.wamsler.eu

furnace component

(depending on model)

stove body including side parts, back panels,

add-on elements, cast sockets and grates,

cladding and doors

controls / sliders, rods and handles

handles, cladding parts

glass pane

combustion chamber lining, insulation / baffle

plates

combustion chamber lining, insulation / baffle

plates

Use on the doors and glass panes

Reuse

disposal

scrap metal AVV 17 04 05