VM Motori R756EU6EH Manuel D'instructions Pour L'emploi page 87

The engine has been designed and
manufactured as an engine for the
generation of mechanical energy; any
other different or unintended use
relieves VM MOTORI STELLANTIS
EUROPE from any risks that may arise.
In any case, the use of the engine other
than that agreed at the time of purchase
relieves VM MOTORI STELLANTIS
EUROPE from any responsability for
possible damage to engine and property
or injury to persons.
The engine has been manufactured in
compliance with the most recent safety
regulations, however it is good practice to
keep in mind that any moving part can pose
a danger.
Therefore, it is recommended never
to operate on any moving part. Make
sure that no operator is near the engine
before starting it.
- Do not touch the hot parts of the engine.
Avoid the effects of heat radiated by the
engine.
- Do not come into contact with or ingest
any substance, liquid or otherwise, used for
engine operation and maintenance.
- The operator in charge of the engine
installation and maintenance must wear
clothing appropriate to the work
environment and the situation in which s/
he operates: in particular, the use of very
wide clothing, chains, bracelets, rings or
any other object that may be entangled
in moving parts must be avoided. Only
use clothing and/or protective equipment
provided for by the laws in force on safety
at work.
English
SAFETY INFORMATION
- The area in which the operator is working
must always be kept clean and free from
any liquid (oil, etc.) and solid residues
(metal chips, etc.).
- All maintenance operations should be
carried out by using suitable and efficient
equipment and tools.
- Before starting working, the operator
must be perfectly aware of the position
and operation of all controls and engine
characteristics; check all safety devices on
the engine on a daily basis.
- Operate in a well ventilated area: engine
exhaust gases are toxic. Do not operate
in areas with flammable materials or any
other part that may burn in contact with
the hot parts of the engine, such as the
exhaust gas system.
- Cut power supply off according to the
instructions given in this manual.
- Do not keep using the engine if
anomalies signalled or not by warning
lamps - are detected, and in particular if
suspect vibrations occur.
17
R756EU6EH
GB
42432108F