VM Motori R756EU6EH Manuel D'instructions Pour L'emploi page 84

Type of injection
GB
Total capacity of engine internal
cooling circuit
Total capacity of engine cooling
circuit installed on the vehicle
Coolant
DEF fluid
DEF fluid tank capacity supplied
by the manufacturer of the
engine
DEF fluid tank capacity supplied
by the manufacturer of the vehicle
in wich the engine is installed
English
Type of fuel
litres
-
-
-
litres
litres
Fuel supply circuit
Common Rail direct injection with high pressure injection
he engine has been designed to be powered by standard
fuels according to specifications UNI EN 590.
(maximum bio-diesel content 7%)
The use of fuels with specifications other than those
indicated is forbidden.
Cooling circuit
It varies according to the configuration of the cooling circuit
of the vehicle where the engine is installed
Respect the instructions of the manufacturer of the vehicle
in which the engine is installed
Organic Acid Technology (OAT coolant)
The coolant based on ethylene glycol and demineralized
water, also known as "antifreeze", is used to protect the
coolant from freezing.
It also contains chemical additives that protect against
It is required that the coolant conforms to
ASTM D 3306 Type 3 standards.
The use of the following refrigerant fluids is recommended:
Petronas Paraflu UP Ready (ASTM D 3306 Type 3)
Fuchs Maintain Fricofin LL50 (ASTM D 3306 Type 3).
NOTE: Only ready-to-use refrigerant fluids are permitted.
Concentrated fluids to be mixed with water are not
Exhaust circuit
IMPORTANT: it is forbidden the use of solutions with
different specifications .
Fluid handling in accordance with specifications
ISO 22241 - 1 - 2 - 3 - 4
14 (including reserve)
Follow the instructions of the manufacturer of the vehicle in
wich the engine is installed
14
R756EU6EH
pump
IMPORTANT:
corrosion.
or
permitted.
42432108F