Publicité
CDI MAGNETO AND STARTER CLUTCH
1
INSPECTION
Starter clutch
1. Inspect:
2. Check:
ı
Checking steps:
Å
G
G
G
G
G
ASSEMBLY AND INSTALLATION
Starter clutch
1. Install:
2. Unloosen the starter clutch assembly by
4 - 41
Starter idle gear teeth a
G
Starter drive gear teeth b
G
Starter wheel gear teeth c
G
Burrs/chips/roughness/wear →
Replace.
Starter clutch operation
G
Push the dowel pins to the arrow direc-
tion.
Unsmooth operation → Replace.
Hold the starter clutch.
When turning the starter wheel gear clock-
wise Å, the starter clutch and the starter
wheel gear should be engaged.
If not, the starter clutch is faulty. Replace
it.
When turning the starter wheel gear coun-
terclockwise ı, it should turn freely.
If not, the starter clutch is faulty. Replace
it.
Starter clutch 1
G
14 Nm (1.4 m · kg, 10 ft · lb)
using the center punch.
ENG
Publicité
