Festo HME- Série Notice D'utilisation page 31

HME−...
With all applications
Please note
The possible dynamics and accuracy of
the HME−.. may be reduced depending on
the fitting (stiffness and temperature
stress).
S Make sure that the module is not
stressed or bent when fitted (e.g. by
fastening in a fixed position and a loose
position).
S Avoid an accumulation of heat.
A high packing density or narrow fitting
situations favour an accumulation of
heat.
S Make sure that the mechanical compo
nents (incl. base) are not fitted too
stiffly.
Avoid damaging the guide tubing aJ.
S
Damage will impair operational safety and
reliable functioning and reduce the ser
vice life of the product.
Select one of the following fastening
S
methods:
Direct fastening Slot nut mounting
on base surface side
(only HME−16−...)
Fig. 7
Festo HME−... 0604NH English
Dovetail mounting
on base surface side
(only HME−25−...)
Fig. 5
Fig. 6
on base surface
31