Festo HME- Série Notice D'utilisation page 29

HME−...
Please note
Particles (e.g. dust, liquids, ...) which penetrate into the linear module can
cause damage or lead to reduced performance of the module.
S Make sure that the maximum concentration of dust for complying with the
permitted IP protection class is not exceeded (see Technical Specifications).
Please note
Incorrect handling can result in malfunctioning.
S Ensure that the specifications in this chapter are always observed.
Only in this way will the product function correctly and safely.
Compare the maximum values specified in these operating instructions with
S
those of your actual application (e.g. forces, torques, temperatures, masses,
speeds).
The HME−... can only be operated in accordance with the relevant safety
guidelines if the maximum loading limits are observed.
Take into consideration the ambient conditions at the location of use.
S
Corrosive environments reduce the service life of the HME−...
Please comply with national and local safety laws and regulations.
S
Remove transport packaging such as foils, caps and cardbord.
S
The packing is intended for recycling (except for: oiled paper = other waste).
Use the product in its original state. Unauthorised modification is not
S
permitted.
Note the warnings and instructions on the product and in the relevant
S
operating instructions.
Festo HME−... 0604NH English
29