Publicité
CONNECTION
Cautions
When connecting or retocating the unit, be sure to turn the power
off or disconnect the power cable.
Noise might be heard, or breakdown
result, when
(1) connection
cords are not of dependable quality, (2) frayed wires of connection
cords are in contact with some object or (3) connections are not
properly
made.
When
connections
are completed,
therefore, we
suggest
that
you
check
not only connections
but also plugs and
cables,
The shorting pin plugs should be inserted into unused PHONO input
terminals, but not into any other terminals; otherwise, signals will
be interrupted and sound may not come from speakers.
Speaker connection
To SPEAKERS
SYSTEM
—A,
—B terminals, connect
speaker cords
taking care
not to confuse
the right channel with the left and plus
polarity with minus.
Turntable connection
Connect
your turntable to the PHONO-1
terminals. When
using two
turntables
or two
tonearms,
use the PHONO-2
terminals too. When
your turntable is equipped
with a grounding cable, connect it to the
unit's GND terminal. But disconnect it when you notice increased hum.
Publicité
