Publicité
i
*
Do
not use chemicals such as chlorothane, etc. for head
block cleaning as the rubber parts will deteriorate.
HEAD DEMAGNETIZING
Prolonged use of the machine will gradually build up
residual magnetism on the heads. The effect of magne-
tization
is that it causes a considerable
drop in high
frequency
response
and
introduces
noise
into your
recordings.
It is therefore, recommended
that head
demagnetizing be performed periodically. This can be
accomplished
with a head demagnetizer
by bringing
the prongs of the demagnetizer close to the heads and
making
several
small circular motions
over all head
surface areas as well as the head housing.
*
Turn off the power of the unit prior to demagnetizing the
heads.
*
Do not use magnetized tools in the vicinity of the heads
and VU Meters.
*
Po not bring the magnetizer close to the VU Meters.
GALLET-PRESSEUR ET CABESTAN
DEMAGNETISATION DES TETES
céder réguligrement 4 une démagnétisation des tétes.
de téte et lui faire effectuer plusieurs mouvements cir-
culaires sur toute la surface du bloc de téte.
*
Ne pas_utiliser d'outils magnétisee a proximite des tétes
nides VU Metres.
*
Ne pas approcher le magnétiseur des VU Metres.
ANDRUCKROLLE
UND TONWELLE
trigerplatte aus.
Publicité
