Télécharger Imprimer la page

SilverCrest SBLF 5 A1 Mode D'emploi Et Consignes De Sécurité page 31

Publicité

Les langues disponibles

Les langues disponibles

Faults
Possible cause
Bluetooth
the playback device.
It is possible that not all of Blue-
tooth
The Blue-
The playback device is not paired
connec-
with the speaker.
®
tooth
tion cannot be
The distance between the speaker
established.
and the playback device is too
great.
Bluetooth
vated on the speaker.
The remote control is pointing the
wrong way.
The battery is inserted incorrectly.
The remote
Battery is empty.
control does not
The distance between the remote
work.
control and the speaker is too
great.
The speaker is switched off.
NOTE
If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section Service).
GB │ IE
28 
®
is not activated on
devices are compatible.
®
operation is deacti-
®
Remedy
Switch on Bluetooth
playback device. Please refer to
its operating instructions for more
information.
Check the settings on your Blue-
device.
®
tooth
Carry out the pairing procedure
again.
Ensure that the speaker is no more
than 10 metres away from the
playback device.
Press the
button on the remote
control
or press and hold the
multifunction button
2 seconds to switch on the Blue-
®
function.
tooth
Point the remote control towards
the front of the speaker.
Check the battery and, if neces-
sary, insert it correctly.
Replace battery.
Move the remote control closer to
the speaker.
Press the multifunction button
to switch the speaker on.
on your
®
for about
SBLF 5 A1

Publicité

loading