Assembling Your Fan; Turning On Your Fan And Speed Selection; Oscillating Function - Rotel U7592CH Mode D'emploi

 ASSEMBLING YOUR FAN
o
Assemble guard cover and shroud ring
Place the back cover onto the output shaft of the motor. Note the direction of rota-
tion. Then tighten the fastener to hold the back cover in place.
o
Install fan blade
Slide the Fan Blade on to the output shaft of the motor in front of the back cover.
Then tighten the fastener of the fan blade in an anticlockwise direction.
o
Assemble front cover
Insert the circle of the front cover into the groove of the shroud ring, which has
been fixed to the back cover. Finally fasten the bolts into the screw of the joint
shroud ring.
 TURNING ON YOUR FAN AND SPEED SELECTION
o
To turn on the fan, press one of the Speed Selection switches.
o
Setting 1 is for low fan speed.
o
Setting 2 is for medium fan speed.
o
Setting 3 is for high fan speed.
o
Setting 0 will turn the fan off.
N.B. Do not cover the fan, or place anything over it.
 OSCILLATING FUNCTION
o
To turn on the oscillating function, press the OSCILLATION KNOB.
o
To stop the fan oscillating, pull up the OSCILLATION KNOB.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
26