Télécharger Imprimer la page

Polar Refrigeration G623 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
UK
l
Control Pane
Set the Operating Temperature
Press the
button. The display will flash.
1.
Press the
or
buttons to display the required temperature.
2.
Press the
button to store the temperature.
3.
Manual Defrost
Press and hold the AUX button for 2 seconds to begin a manual defrost. The defrost light illuminates.
Lock/Unlock the Control Panel
To lock the control panel:
Press and hold the UP
1.
Pof flashes on the display and the keyboard is locked.
2.
Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning.
Clean the interior of the appliance as often as possible.
Do not use abrasive cleaning agents. These can leave harmful residues.
Clean the door seal with water only.
Always wipe dry after cleaning.
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
Take care when cleaning the rear of the appliance. Sharp edges can cut.
A POLAR agent or qualified technician must carry out repairs if required.
Marble Care
Do not use abrasive materials or detergents to clean the worktop. Wash with warm, soapy water.
Dry thoroughly with a soft cloth after cleaning.
Wipe up any spillages as quickly as possible, particularly liquids such as lemon juice or vinegar.
POLAR recommend the use of a chopping board to reduce the risk of damage to your worktop.
Cleaning the Condenser
The condenser is part of the refrigeration system. The condenser filter requires monthly cleaning.
Always disconnect power supply before carrying out Routine Maintenance.
Failure to clean the condenser filter will reduce the performance and life of your Polar unit and may
invalidate your warranty
These models have a removable filter which can be cleaned with a vacuum cleaner..
3
and DOWN
buttons simultaneously for 3 seconds.

Publicité

loading

Ce manuel est également adapté pour:

G603