Cleaning; Troubleshooting - Medion MD 16480 Mode D'emploi

13. Cleaning

DANGER!
Risk of electrocution
− Before cleaning, turn the control knob to speed setting "0" and remove the mains plug.
− Never immerse the appliance in water or other liquids!
− Always disconnect the appliance plug from the mains socket before cleaning or
servicing the appliance and before fitting or dismantling the attachments.
− Before cleaning, all attachments must be removed from the main appliance.
PLEASE NOTE!
Risk of damage to the appliance if handled incorrectly
− Do not use a wire brush or other scourer or any sharp or scouring cleaning agents.
Motor housing:
− Only clean the external housing of the appliance, using a damp cloth with a small
amount of washing up liquid. Dry off with a cloth.
Dough hook, beater, mincer feed screw, feed tube with feed screw housing, feed tray
and fixing ring of the mincer:
− Do NOT clean these components in the dishwasher! Under the influence of heat and
aggressive cleaning agents, they can become distorted or discoloured. They can be
hand washed in hot water with washing-up liquid. Rinse and dry thoroughly.
Plastic accessories, whisk, mixing bowl, mix container, inner blade and meat cutting
discs:
− These accessory parts can be cleaned with hot water and washing-up liquid or in the
dishwasher. Do not use any scouring agents.
− After drying, wipe the meat cutting discs and cutting blade of the mincer with a little
vegetable oil.

14. Troubleshooting

Problem
The mains plug is not
properly inserted.
The appliance will
not start
The socket is defective.
62 of 86
Possible cause
Pull out the plug, wait 10 seconds and then plug it back
in again.
Check the socket by connecting another appliance.
Solution