BEFORE USING THE DISHWASHER
Before using the dishwasher, please read the Important Safety
Instructions.
Water supply temperature should be a minimum of 120 °F (49 °C)
for better washing and reasonable cycle time.
For this reason, use the hot water supply only. It is also important
that the dishwasher is loaded according to instructions for effec-
tive cleaning. When loading the dishwasher, make sure that in-
soluble items such as bones, toothpicks, and pieces of paper have
been removed.
SPECIFICATIONS
• Power Supply: 120 V, 60 Hz AC only, minimum 15 A circuit breaker
• Water Pressure: 20–120 psi (140–830 kPa)
• Size (WxDxH): 23
/
" x 24
/
"x 33
3
5
4
8
• Inlet Water Temperature: 120 °F (49 °C) minimum
• Product Weight : - LDT9965 : 100.5 lbs.(45.6 kg)
The appearance and specifications are subject to change without notice.
SAVE THESE INSTRUCTIONS
/
" (603 mm x 625 mm x 851 mm)
1
2
IMPORTANT SAFETY INFORMATION
When loading the dishwasher, observe the following general
guidelines:
1. Place items with deep dish bottoms at an angle to help water
run off and speed the drying process.
2. Remove solid, burned-on scraps from dishes prior to loading
in the dishwasher.
3. Only load items that are dishwasher-safe.
NOTE
Do not load utensils that are not heat-resistant, have
decorative metal trim, etc.
5