Publicité
Les langues disponibles
Les langues disponibles
18
OPERATING INSTRUCTIONS
LOADING THE CUTLERY RACk
The cutlery rack is best suited for washing flatware and most cook-
ing or serving utensils. The separators on the cutlery racks help
keep flatware separated to avoid damage and improve cleaning.
The rack can also accommodate small prep bowls and lids. Using
the rack allows you to remove the silverware baskets from the
lower racks.
NOTE: For best cleaning performance, place flatware in the silver-
ware baskets. Heavily soiled utensils or items with baked on foods
should be placed in the middle rack or spoon basket for best per-
formance.
④
③
①
②
Sample 10-place setting.
Right
Alternate
⑤
④
③
②
⑤
①
Wrong
If the handles of your flatware
are too thick, then reverse the
pieces so that the handles face
the other direction, as shown
in the bottom figure.
HEIGHT ADJUSTABLE TRAY
Each side tray can be adjusted independently to a high or low
position to accommodate different sizes of utensils or cutlery.
Remove dishes before adjusting the tray.
Each tray is adjusted by lifting it out and rotating it front to back.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more space is needed on
the upper rack for larger items.
NOTE
Always remove the cutlery from the rack before removing
the rack.
Pull the rack out to the end of the rails. Then, lift the front of the
rack so that the rollers clear the stop on the end of the rail. The
rack can now be slid forward and removed from the rails.
WARNING
Be careful when loading and unloading sharp edged items. Load
sharp knives with the blade down to reduce the risk of injury.
Publicité
