Rupes S130 Instructions De Fonctionnement page 9

TECHNICAL SPECIFICATIONS SERIE S1/S2
OPERATING VOLTAGE AND FREQUENCY
POWER
POWER AT SOCKET (MAX)
TOTAL POWER (MAX)
AIR CAPACITY EN 60335-2-69
VACUUM LEVEL
WEIGHT
DIMENSIONS
CLASS OF PROTECTION
NOISE LEVEL ISO 3744
FILTERS SURFACES
CAPACITY OF DUST COLLECTION BAG
CONTAINER CAPACITY
POWER CONTROL SWITCH
PNEUMATIC SECTION
INLET AIR PRESSURE
MAX COMPRESSED AIR FLOW
INLET FITTING
PARTS OF THE TOOL
PARTS OF THE TOOL
1 - Vacuum head 1 - Vacuum head
2 - Tool tray
2 - Tool tray
3 - Handle
3 - Handle
4 - Identification plate
4 - Identification plate
5 - Compressed air inlet (VERSION "P")
5 - Compressed air inlet (VERSION "P")
6 - Air coupling filter (VERSION "P")
6 - Air coupling filter (VERSION "P")
7 - Power cord
7 - Power cord
8 - Cooling air inlet
8 - Cooling air inlet
9 - Cooling air outlet
9 - Cooling air outlet
10 - Operating air outlet
10 - Operating air outlet
11 - Head lockers
11 - Head lockers 12 - Man-0-Aut switch with speed control
13 - Motor ON indicator
12 - Man-0-Aut switch with speed control
14 - Liquid level indicator (VERSION "E")
13 - Motor ON indicator
15 - Service indicator
14 - Liquid level indicator (VERSION "E")
16 - Electric tool socket
15 - Service indicator
17 - Quick coupling for pneumatic tool (VERSION "P")
16 - Electric tool socket
18 - Pneumatic tool connection
17 - Quick coupling for pneumatic tool (VERSION "P")
19 - Electric tool hose
18 - Pneumatic tool connection
20 - Pneumatic tool hose (optional)
19 - Electric tool hose
21 - Filter frame
20 - Pneumatic tool hose (optional)
22 - Filter frames lockers
21 - Filter frame
23 - Filters (paper or polyester)
24 - Liquid level sensor (VERSION "E")
22 - Filter frames lockers
25 - Dust bin
23 - Filters (paper or polyester)
26 - Accessories compartment (VERSION 45 l)
24 - Liquid level sensor (VERSION "E")
27 - Antistatic connection
25 - Dust bin
28 - Hose nozzle
26 - Accessories compartment (VERSION 45 l)
29 - Universal swivelling nozzle
27 - Antistatic connection
30 - Dust collection bag (paper or plastic)
28 - Hose nozzle
31 - Castor wheels with lock
29 - Universal swivelling nozzle
32 - Suction hose setting (VERSION "M")
30 - Dust collection bag (paper or plastic)
33 - Rubber cap (VERSION "M")
31 - Castor wheels with lock
34 - Softgrip handle
35 - Swivel block for fixing case
32 - Suction hose setting (VERSION "M")
33 - Rubber cap (VERSION "M")
230 Vac - 50/60 Hz
JP 100 Vac - 50/60Hz
1200 W 1200 W
JP 1050 W (@min.500 W)
EU 2400 W
UK 1800 W
CH-DK 1100 W
AUS 1200 W
JP 380 W (@min.930 W)
UK (110V) 1100 W
UK 110 W
EU 3600 W
UK 3000 W
CH-DK 2300 W
AUS 2400 W
JP 1430 W
UK (110V) 2150 W UK 110 W
250 m 3 /h
215 hPa
10,2 kg (S130-S230)
13,5 kg (S145-S245)
cm 43 x 42,5 x h 51 (S130-S230)
cm 47 x 45 x h 63,5 (S145-S245)
IP X 4
70 dB(A) - 73 dB (A) VERSION "E"
2 x 0,50 m 2
kg 5 max
30 l (S130-S230)
45 l (S145+S245)
MAN - O - AUT
VERSION "P"
6 bar
1450 l/min
3/8" G female
START-UP
Power supply
- Turn the main switch (12) to "O" (off) before connecting this appliance to the supply mains;
- supply mains voltage and frequency must match the identification plate;
- connect to power socket outlets provided with earth conductor and adequate protections.
Compressed air mains
- Do not exceed 6 bar;
- dehumidified and filtered air required;
- connect the appliance to the compressed air main with an hose suitable for the air pressure
and int. diam. 10 mm min.
Assembling the swivelling adaptor (29)
Insert the adaptor in the inlet nozzle (28).
Electrical tool connections
- Check for the tool switch turned off before connecting it to the front panel socket outlet;
- insert the tool plug into the front panel socket (16) (pic. 3);
- connect the tool to the swivelling nozze with the hose (19) (pic. 5);
- do not plug electric tools exceeding the power indicated on the front panel.
Pneumatic tool connections
- Check for the tool switch turned off before connecting it to the front panel quick coupling;
- connect the tool to the appliance with the quick couplings (17) (pic. 4) and (18) (pic. 6);
- connect the coaxial hose (optional) to the quick coupling (20) (pic.6).
Check the tool functioning as indicated on their instructions manual.
Preliminary checks
- Check that the dust collection bag (30) has been fitted in the container (25) and that the
filters (23) have been fitted on the head;
- check that the vacuum hose is properly fixed and does not hinder tool movement;
- check that there are no leaks in the compressed air supply system.
9