Publicité
Section 2 Installation
GF100 Series
2-19 Electrical Connections
2-19-1 DeviceNet Connections
2-12
The latest MutliFlo Configurator Software and Databases and MultiFlo
Configurator Quick Start Guide are available on the Brooks Instrument
website at: www.BrooksInstrument.com/MultiFlo. Please reference the
MultiFlo Configurator Quick Start Guide for installation and operation
details. Download the MultiFlo Configurator software into your computer
from the Brooks Instrument website www.BrooksInstrument.com/MultiFlo.
Install the MultiFlo Configurator as described in the MultiFlo Configurator
Quick Start Guide and use the guide as a reference for operation details.
DeviceNet is a 5 wire local network connection that employs a command
response communication protocol for communicating between a master
and slave. Obtain a DeviceNet communication cable (Micro M-12) and
fasten it to the 5-pin connector as shown in Figure 2-13.
DeviceNet (M-12)
Connector Cable
Figure 2-13 GF100 Series DeviceNet Connection
Installation and Operation Manual
X-TMF-GF100-Series-MFC-eng
Part Number: 541B137AAG
DeviceNet 5-Pin (M-12)
Connector (M)
2
1
3
4
Pin
Connection
1
Drain
2 V+ (11-25 Vdc)
3
V--
4
CAN-H
5
CAN-L
April, 2017
5
Publicité
