English
– Permissible ambient temperature range during
use or storage: 32 °F to 122 °F (0 °C to 50 °C)
If the blower is used or stored at ambient temper‐
atures above 86 °F (30 °C), its runtime and per‐
formance may be reduced.
23.2
STIHL LK 45
– Mains voltage: 100 V to 240 V
– Rated current: 0.4 A
– Frequency: 50/60 Hz
– Charging current: 0.65 A
– Rated power: 14.6 W
– Insulation: Class II (Double Insulation)
– Permissible ambient temperature range during
charging: 32 °F to 104 °F (0 °C to 40 °C)
Ambient temperatures above 86 °F (30 °C) may
increase charging times.
23.3
Symbols on the Blower and
Charger
Symbol Explanation
V
Volt
Hz
Hertz
A
Ampere
Ah
Ampere hour
Wh
Watt hour
DC
Direct current
AC
Alternating current
Push and hold the retaining latch in
this direction to unlock
Direct current
Polarity of coaxial output connector
Number of cells and stored energy accord‐
ing to cell manufacturer's specification.
Usable energy will be less.
STIHL products must not be disposed of in
the household trash, but only in accord‐
ance with local, state and federal laws and
regulations and as provided in this manual,
25.
The RBRC seal indicates that STIHL has
prepaid for battery recycling.
Insulation: Class II (Double Insulation)
Use and store charger only indoors in dry
rooms.
California Energy Commission. This bat‐
tery system complies with the California
2
The battery is marked with its stored energy as provided by the cell manufacturer. Usable energy
available to the operator will be less.
18
24 Replacement Parts and Equipment
Energy Commission efficiency require‐
ments.
23.4
Engineering Improvements
STIHL's philosophy is to continually improve all
of its products. As a result, engineering changes
and improvements are made from time to time.
Therefore, some changes, modifications and
improvements may not be covered in this man‐
ual. If the operating characteristics or the appear‐
ance of your machine differs from those descri‐
bed in this manual, please contact your STIHL
dealer or the STIHL distributor in your area for
assistance.
23.5
EMC Compliance Statement
for Power Tool and Charger
This Class B digital apparatus complies with
Canadian ICES‑003.
24 Replacement Parts and
Equipment
24.1
Genuine STIHL Replacement
Parts
STIHL recommends the use of genuine STIHL
replacement parts. Genuine STIHL parts can be
identified by the STIHL part number, the
logo and, in some cases, by the STIHL parts
symbol
. The symbol may appear alone on
small parts.
25 Disposal
25.1
Disposal of the Blower and
Charger
WARNING
■ Even if believed to be discharged, the lithium
ion battery integrated into the blower may
never totally discharge and still may deliver a
dangerous short circuit current. Handle a dis‐
charged/depleted blower carefully. If damaged
or exposed to high temperatures, it may leak,
generate heat, catch fire or explode.
STIHL products must not be thrown in household
trash or disposed of except as outlined in this
manual.
0458-719-8221-B