Peavey ValveKing Royal 8 Mode D'emploi page 8

9
AC POWER INLET:
9
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord
to this connector to provide power to the unit. Damage to the equipment may result if improper line
voltage is used. (See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used
does not have a ground pin, a suitable grounding adapter should be used, and the third wire should
be grounded properly. To prevent the risk of shock or fire hazard, always make sure that the
amplifier and all associated equipment is properly grounded.
NOTE: FOR UK ONLY
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows: (1) The wire which is colored
green and yellow must be connected to the terminal which is marked by the letter E, or by the Earth
symbol, or colored green or green and yellow. (2) The wire which is colored blue must be connected
to the terminal which is marked with the letter N, or the color black. (3) The wire which is colored
brown must be connected to the terminal which is marked with the letter L, or the color red.
To avoid the risk of electrical shock, do not place fingers or any other objects into empty tube sockets
while power is being supplied to unit.
Suggested Settings
Punk/Metal/High-Gain Stuff:
GAIN: 6
Thick Clean/Blues
GAIN: 3.5
TONE: 5-7
TONE: 3.5
8
MASTER: 4-6
MASTER: 10