Télécharger Imprimer la page

Beta Motorcycles RR 200 2T EUROPA Mode D'emploi page 125

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 181
STARTING THE ENGINE
Move the fuel tank valve in ON or RES position (page 18).
Check that the gears are in neutral (page 21).
Pull the clutch lever (page 19).
Close the side stand (page 21).
WHIT ELECTRIC STARTER (page 20):
Press the startup button for a max of 3 seconds. If the vehicle does not startup, wait
30 seconds before attempting a new startup.
NOTE
Pauses are needed to diffuse the generated heat and to avoid damaging the battery.
If the battery is at a temperature below 15°C, the electric startup will be weak, not
because the battery is deteriorated but because it needs to be warmed up. Therefore,
with temperatures below 15°C, several startup attempts may be necessary to heat
the battery and thereby increase the battery power provided by the battery.
Do not press the button while the engine is running.
WITH KICK-STARTER (OPTIONAL) (page 21):
Depress the kick-starter with a sharp movement of the foot.
ATTENTION
Once the pedal has been depressed, release it immediately. This avoids
jolts to the entire ignition group and to the foot.
COLD STARTING:
Operate the starter (page 19), start the vehicle as described above, wait a few
seconds, then move the starter back to its starting position.
ENGINE SHUT-DOWN
To shut-down the engine press the button
NOTE:
With the engine off, make sure the fuel cock is set to OFF (page 18).
(OPTIONAL) (page 21):
(page 21):
35
as described above, wait a few
on the left switch unit (page 20).
2
, wait a few
EN

Publicité

loading

Ce manuel est également adapté pour:

Rr 200 2t