KTM 6350297900030 Instructions De Montage page 24

5 ASSEMBLY
10
–
Move the bar into the desired position and tighten screws
Guideline
Screw, handlebar
clamp
501499-01
–
Tighten screws
Guideline
Screw, aluminum
bracket
–
Tighten screws
Guideline
Screw, aluminum
bracket
501500-01
–
1
Mount left
included) and tighten them.
501501-01
Final steps
–
Check the steering angle - hand guards must not touch the
combination instrument.
–
Check that the brake and clutch lever can move freely - hand
guards must not touch the levers.
M6x20 6 Nm (4.4 lbf ft)
bn
.
M8x50 20 Nm (14.8 lbf ft)
bk
.
M8x40 25 Nm (18.4 lbf ft)
2
and right hand guards using screws
5
.
8
(all