Cristec YPOWER 24V-12V/60A Manuel Utilisateur page 38

12
13
14
15
Some specific settings are possible – please consult us.
(*) Voltage on + BAT with 10% of the rated current and a tolerance of +/- 1%.
( )
** REFRESH is not advised for certain types of AGM batteries
(***) Battery Management System
3.3.3 Programming field 2 : Select special mode
- The BOOST function allows a faster charging of the batteries. This function is timed in time (see section 3.3.2.)
And is automatically inhibited if the battery is charged: shutdown of the BOOST for a battery current <20% of
the nominal current of the charger (12% in the case of the Lithium curve Iron Phosphate with BMS).
- The REFRESH function allows to apply a voltage step periodically to maintain the battery, to promote its
equalization and thus prevent possible sulfating.
Specific 12V/24V
36V/48V
Specific 12V/24V
36V/48V
OFF
OFF
Setting
0
1
2
3
12V/24V
36V/48V
12V/24V
36V/48V
Programming with CAN bus
Programming with UNI-DISPLAY-R
REFRESH BOOST
mode mode
OFF OFF
OFF ON
ON OFF
ON ON
0H 0H
0H 0H
37