Publicité
Les langues disponibles
Les langues disponibles
Table of contents
User interface and navigation
Startup
on page 6
Set up the reagents and standards
Measure a grab sample or standard
Set up the system
on page 11
Safety information
Refer to the installation user manual for general safety information, hazard descriptions and
precautionary labels descriptions.
User interface and navigation
Keypad description
Refer to
Figure 1
for the keypad description and navigation information.
Figure 1 Keypad description
1 Display
2 Navigation keys RIGHT, LEFT: switch
measurement displays, select options, navigate
data entry fields
3 Navigation keys UP, DOWN: scroll menus, scroll
measurement channels, enter numbers and letters
4 Home: go to the main measurement screen
5 Enter: confirm and open sub-menus
Display description
Refer to
Figure 2
for the measurement screen descriptions. Refer to
descriptions.
on page 3
on page 10
on page 10
Configure the outputs
on page 13
View data
on page 17
Use an SD card
on page 19
Calibration
on page 19
6 Diag: enter the DIAG/TEST MENU
7 Cal: enter the CALIBRATE MENU
8 Back: go back to the previous menu
9 Menu: select options from the analyzer main menu
Figure 3
for the system status
English 3
Publicité
